|
BACK
|
|
Miniature Injector Molding offers substantial latitude in regard to modifying our
standard machines to meet your customized needs. With the modular design of the
Mini-Jector, we are able to mate different base configurations to various injection
assemblies, clamp assemblies and control packages. Just a few of the modifications we've
done in the past are shown below.
|
| |
This Model 55 Mini-Jector was modified to accept a horizontal parting line with vertical
injection.
(This picture was taken before guarding was put in place).
|
|
| |
|
These pictures show a rounded nozzle that makes contact with a similar curve on the mold.
This contact clamps the mold, and the floating non-drool nozzle tip opens after a certain
displacement from contact. The mold slides into position on the bottom fixed platen.
There is a slight amount of play with both the top and bottom guides to allow a centering
effect from the rounded nozzle, ensuring consistent injection.
|
| |
|
To increase production, some customers use an index table to shuttle molds
into the injection portion of the machine. We can accommodate vertical
and horizontal injection with our C-frame designs.
|
|
| |
