| BACK |
- Bench top, hydraulically-operated injection molding machine
- Manual or semi-automatic vertical clamping and injection
- Uses self-clamping V-mold technology
- Independent short-stroke hydraulic cylinder to generate clamping force
- This permits full-clamp force independent of injection pressure
- Reciprocating screw plasticizing injection unit
- Adjustments are provided for:
- Screw speed
- Back pressure
- Injection pressure
- Injection speed
- Control unit includes:
- Solid state timers
- Three (3) temperature controllers for front, rear, and nozzle zones
- Power Options
- 220V, single phase
- 220V with center tap (house wiring)
- 220V, three phase
- 480V, three phase
- A high-pressure option is available. Contact us for details.
|
 |
| Pump Delivery | | 1.95 | | GPM | | Pump Delivery @ 1740 rpm | | 1.89 | | GPM | | Hydraulic System Pressure | | 2000 | | PSI | | Reservoir Capacity | | 5.4 | | Gallons | | Rated Current @ 230VAC | 20 | 23 | TBD | Amps | | Approx. Machine Shipping Weight | 650 | 700 | 775 | Pounds | | Machine Footprint (W x D) | | 23 x 28 | | Inches |
| Approx. Max Clamp Force | 11.75 | 11.75 | 18.36 | Tons | | Standard Mold Size (LxWxH) | 7 x 2 x 3 | 7 x 2 x 3 | 10 x 5 x 3 | Inches | | Maximum Casting Area | 6.0 | 6.0 | 9.0 | in2 | | Mold Ejection Force | 3,313 | 3,313 | 6,847 | Pounds |
| Hopper Capacity | | 12 | | Pounds | | Screw Diameter | 0.875 | 1.125 | 1.375 | Inches | | Screw Stroke | 3.0 | 4.0 | 5.0 | Inches | | Maximum Screw Displacement | 1.80 | 3.98 | 7.32 | in3 | | Maximum Shot Size | 1.0 | 2.15 | 4.0 | Ounces | | Maximum Injection Pressure | 16,065 | 16,593 | 11,107 | PSI | | Maximum Screw Speed | 172 | 106 | 65 | RPM | | Plasticizing Capacity | 17.5 | 18.5 | 19.0 | lbs/hour | | Screw Recovery Rate | 0.077 | 0.082 | 0.084 | oz/sec | | Maximum Nozzle Discharge Rate | 1.13 | 1.09 | 1.63 | in3/sec | | Barrel Heater Capacity | 2,100 | 2,700 | 2,700 | Watts | | Nozzle Heater Capacity | | 150 | | Watts |
(Specifications may change without notice)
|
|
