| BACK |
- Bench top, hydraulically-operated injection molding machine
- Manual or semi-automatic vertical clamping and injection
- Uses self-clamping V-mold technology
- Plunger-type plasticizing system available in a variety of plunger diameters
- Plungers can be interchanged in minutes to offer maximum flexibility
- Self-contained hydraulic unit (requires no outside air source)
- Controlled by ABB motor starter
- Uses a solenoid-operated directional valve
- Independent relief valve and an oil-filled pressure gauge allow for precise injection
pressure settings
- Employs a 2” bore hydraulic injection cylinder
- Control unit includes:
- Solid state timer
- Two auto-tune pyrometers (barrel and nozzle temperature zones)
- Power Options
- 220V, single phase
- 220V with center tap (house wiring)
- 208V, three phase
- 220V, three phase
|
|
| |
Plunger
Diameter
(Inches) |
Injection
Volume
(Inches3) |
Injection
Pressure
@ 2000 PSI
Hydraulic Pressure
(PSI) |
Max Shot
Size
(oz) |
1/2
5/8
3/4
7/8
1 - 1/16 |
1.178
1.841
2.651
3.608
5.304 |
32,000
20,480
14,223
10,449
7,068 |
0.33
0.50
0.75
1.00
1.50 |
| |
| Cylinder Heater Capacity | 1,050 | Watts | | Nozzle Heater Capacity | 150 | Watts | | Injection Cylinder Bore | 2.0 | Inches | | Injection Cylinder Stroke | 6.0 | Inches | | Approx. Maximum Clamp Force | 11.75 | Tons | | Maximum Casting Area | 6.0 | in2 | | Mold Ejection Force | 3,313 | Pounds | | Hopper Capacity | 12 | Pounds | | Standard Mold Size (LxWxH) | 7 x 2 x 3 | Inches | | Rated Current @ 230VAC | 20 | Amps | | Approx. Machine Shipping Weight | 550 | Pounds | | Machine Footprint (W x D) | 22 x 32 | Inches |
(Specifications may change without notice)
|
|
