| BACK |
- Bench top, pneumatically-operated injection molding machine
- Manual or semi-automatic vertical clamping and injection
- Uses self-clamping V-mold technology
- Plunger-type plasticizing system available in a variety of plunger diameters
- Plungers can be interchanged in minutes to offer maximum flexibility
- Material hopper specifications
- Made of aluminum or optional stainless steel
- 12 lb. capacity
- Automatically meters material during the machine cycle
- Includes shut off and dump tube
- Requirements
- 2HP air compressor with a minimum of 80 PSI output
- Power Options
- 120V, single phase
- 220V, single phase
|
 |
| |
Plunger
Diameter
(Inches) |
Injection
Volume
(Inches3) |
Injection
Pressure
@ 125PSI
Air Pressure
(PSI) |
Max Shot
Size
(oz) |
1/2
5/8
3/4
7/8
1 - 1/16
|
1.178
1.841
2.651
3.608
5.304
|
32,000
20,480
14,223
10,449
7,068
|
0.33
0.50
0.75
1.00
1.50
|
| |
| Cylinder Heater Capacity | 1,050 | Watts | | Nozzle Heater Capacity | 150 | Watts | | Injection Cylinder Bore | 8.0 | Inches | | Injection Cylinder Stroke | 6.0 | Inches | | Approx. Maximum Clamp Force | 11.75 | Tons | | Maximum Casting Area | 6.0 | in2 | | Mold Ejection Force | 6,098 | Pounds | | Hopper Capacity | 12 | Pounds | | Standard Mold Size (LxWxH) | 7 x 2 x 3 | Inches | | Rated Current @ 120VAC | 10 | Amps | Compressed Air Req'd Per Cycle
@ 100PSI | 2.56 | ft3 | | Approx. Machine Shipping Weight | 415 | Pounds | | Machine Footprint (W x D) | 18 x 25 | Inches |
(Specifications may change without notice)
|
|
