Request Literature Request Quote Send a Message

[Model #45 | Model #50 | Model #55 | Model #60 | Model #70 | Model #75]

The Model #45 "Wasp" Mini-Jector is a benchtop injection molding machine that requires only an air supply and a 115V current for operation. It requires a minimum of benchspace and can be purchased with a variety of heating cylinder sizes and various shot capacities and pressures. Heating cylinders can be interchanged in minutes to offer you the maximum flexibility. An Air compressor of at least 2HP with a minimum of 80 PSI output is recommended for this machine. Electric power requirement is only 10 amps. An aluminum (or optional stainless steel) 12lb. capacity material hopper with a shut off and dump tube automatically meters material during the machine cycle, which is controlled by a timer.

Specifications
(Specifications may change without notice)

	Injection volume-in. 3 plunger diameter
	1/2	1.178
	5/8	1.841
	3/4	2.651
	7/8	3.608
	Injection pressure-PSI @ 125 PSI plunger diameter
	1/2	32,000
	5/8	20,480
	3/4	14,223
	7/8	10,449
	Max. shot size-ounces Styrene
	1/2	.33
	5/8	.50
	3/4	.75
	7/8	1.00
	Cylinder Heater Wattage	1,050
	Nozzle Heater Wattage	150
	Injection Cylinder Bore-inches	8.0
	Injection Cylinder Stroke-inches	6.0
	Approx. Maximum Clamp Force-Tons	11.75
	Maximum Casting Area-in. 2	6.0
	Mold Ejection Force-Lbs	6,098
	Max. Mold Size-WxLxH-inches	7.00x3.00x2.125
	Power Consumption-AMPS@ 120 VAC	10.00
	Free air (cu. ft.) required per cycle @ 100 p.s.i	2.56
	Machine Shipping Weight-Lbs	415
	Overall Dimensions-WxLxH	22.4x29.8x43.375